document number: 94144 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 13-aug-08 1 schottky rectifier, 2 x 8 a 16ctq...gspbf/16ctq...g-1pbf vishay high power products features ? 175 c t j operation ? center tap configuration ? low forward voltage drop ? high frequency operation ? high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance ? guard ring for enhanced ruggedness and long term reliability ? lead (pb)-free (?pbf? suffix) ? designed and qualified for industrial level description this center tap schottky rect ifier series has been optimized for low reverse leakage at high temperature. the proprietary barrier technology allows for reliable operation up to 175 c junction temperature. typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. product summary i f(av) 2 x 8 a v r 60/100 v 16ctq...gspbf base common cathode d 2 pak to-262 16ctq...g-1pbf anode anode common cathode 1 3 2 2 base common cathode anode anode common cathode 1 3 2 2 available rohs* compliant major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform 16 a v rrm 60/100 v i fsm t p = 5 s sine 650 a v f 8 apk, t j = 125 c (per leg) 0.58 v t j range - 55 to 175 c voltage ratings parameter symbol 16ctq060gspbf 16ctq060g-1pbf 16ctq080gspbf 16ctq080g-1pbf 16ctq100gspbf 16ctq100g-1pbf units maximum dc reverse voltage v r 60 80 100 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units maximum average forward current see fig. 5 per leg i f(av) 50 % duty cycle at t c = 148 c, rectangular waveform 8 a per device 16 maximum peak one cycle non-repetitive surge current per leg see fig. 7 i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 650 a 10 ms sine or 6 ms rect. pulse 210 non-repetitive aval anche energy per leg e as t j = 25 c, i as = 0.50 a, l = 60 mh 7.50 mj repetitive avalanche current per leg i ar current decaying linearly to zero in 1 s frequency limited by t j maximum v a = 1.5 x v r typical 0.50 a * pb containing terminations are not rohs compliant, exemptions may apply
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94144 2 revision: 13-aug-08 16ctq...gspbf/16ctq...g-1pbf vishay high power products schottky rectifier, 2 x 8 a note (1) pulse width < 300 s, duty cycle < 2 % electrical specifications parameter symbol test conditions values units maximum forward voltage drop per leg see fig. 1 v fm (1) 8 a t j = 25 c 0.72 v 16 a 0.88 8 a t j = 125 c 0.58 16 a 0.69 maximum reverse leakage current per leg see fig. 2 i rm (1) t j = 25 c v r = rated v r 0.28 ma t j = 125 c 7.0 threshold voltage v f(to) t j = t j maximum 0.415 v forward slope resistance r t 11.07 m maximum junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c 500 pf typical series inductance per leg l s measured lead to lead 5 mm from package body 8.0 nh maximum voltage rate of change dv/dt rated v r 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case per leg r thjc dc operation see fig. 4 3.25 c/w typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.50 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case style d 2 pak 16ctq060gs 16ctq080gs 16ctq100gs case style to-262 16ctq060g-1 16ctq080g-1 16ctq100g-1
document number: 94144 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 13-aug-08 3 16ctq...gspbf/16ctq...g-1pbf schottky rectifier, 2 x 8 a vishay high power products fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junc tion capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 1 10 100 i f - instantaneous forward current (a) v fm - forward voltage drop (v) 0.2 0.4 0.8 1.2 1.6 2.2 1000 t j = 175 c t j = 125 c t j = 25 c 0.6 1.0 1.4 1.8 2.0 i r - reverse current (ma) v r - reverse voltage (v) 02040 60 100 0.001 0.01 0.1 1 10 0.0001 80 100 t j = 150 c t j = 125 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c t j = 175 c c t - junction capacitance (pf) v r - reverse voltage (v) 04060 80 100 1000 20 100 t j = 25 c z thjc - thermal impedance (c/w) 0.01 0.1 1 10 t 1 - rectangular pulse duration (s) 0.00001 0.0001 0.001 0.01 0.1 1 10 single pulse (thermal resistance) d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94144 4 revision: 13-aug-08 16ctq...gspbf/16ctq...g-1pbf vishay high power products schottky rectifier, 2 x 8 a fig. 5 - maximum allowable case temperature vs. average forward current (per leg) fig. 6 - forward power loss characteristics (per leg) fig. 7 - maximum non-repetitive surge current (per leg) fig. 8 - unclamped inductive test circuit note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 10 v allowable case temperature (c) i f(av) - average forward current (a) 014 6 100 120 150 180 21012 130 160 square wave (d = 0.50) 80 % rated v r applied see note (1) dc 48 170 140 110 0 2 5 7 average power loss (w) i f(av) - average forward current (a) 0 812 6 3 1 6 4 2 10 4 d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 rms limit dc i fsm - non-repetitive surge current (a) t p - square wave pulse duration (s) 100 1000 10 100 1000 10 000 at any rated load condition and with rated v applied following surge rrm current monitor high-speed switch d.u.t. r g = 25 + freewheel diode v d = 25 v l irfp460 40hfl40s02
document number: 94144 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 13-aug-08 5 16ctq...gspbf/16ctq...g-1pbf schottky rectifier, 2 x 8 a vishay high power products ordering information table 1 - current rating (16 = 16 a) 2 - c = common cathode 3 - t = to-220, to-262, d 2 pak 4 - q = schottky ?q? series 5 - voltage ratings 6 - g = schottky generation 7 - none = to-220 -1 = to-262 s = d 2 pak 8 - none = tube (50 pieces) trl = tape and reel (left oriented - for d 2 pak only) trr = tape and reel (right oriented - for d 2 pak only) 9 - none = standard production pbf = lead (pb)-free (for d 2 pak tube and to-262) p = lead (pb)-free (for d 2 pak trl and trr) 060 = 60 v 080 = 80 v 100 = 100 v device code 5 1 3 24 6789 16 c t q 100 g s trl pbf links to related documents dimensions http://www.vishay.com/doc?95014 part marking information http://www.vishay.com/doc?95008 packaging information http://www.vishay.com/doc?95032 spice model http://www.vishay.com/doc?95279
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
